This bearing is for vehicles WITHOUT automated parking system. So far the Timken bearing is performing well. The one I received is made in Korea. The bolts that should be replaced along with the bearing are part number W715064-S442 from Ford. It takes 4 of them. The socket size is an inverted E14. Remove the shock absorber to simplify the installation. Shock absorber takes a 15mm socket for the bottom bolt and a 10mm socket to remove the two smaller bolts on the top. These two bolts you access directly above the bearing. You do not need to remove any parts from the interior of the vehicle. Takes less than 10 min to remove the shock. This will make it easier to disconnect the ABS sensor and remove unusable bearing bolts. Make sure E14 socket rests evenly and with force on bearing bolts will loosening and unscrewing.